Asada electric pipe threading machine for water, gas, electrical and bolt threading, 1/4"-2" capacity, 750 W motor, 44 kg. Approx. price: Rs 1,40,000 / Unit.

Rugged high-pressure manual test pump used for pressure-testing pipework, 220 V, compact and easy to operate. Approx. price: Rs 6,300 / Piece.

Hydraulic testing for leaks in heating and oil installations, air-conditioning, sprinkler and systems. Completed with high pressure hose and connectors. Pump plunger can be lubricated and has replaceable seals. Efficient running needle valves ensure continuous operation. Key Specs: Testing Pressure Range: 0 - 60 bar, Hub Suction Capacity: 13ml/stroke, Tank Capacity: 10 LTRS, Connection: R½", Valve: Single Valve, Weight: 4.5 Kg.

Electric Test Pumps are designed for pressure testing water systems such as water meters, plumbing lines, pressure vessels, solar systems and sprinkler systems, in both residential and commercial buildings. The output pressure is easily adjusted by turning a knob and watching the pressure gauge. Key Specs: Testing Pressure Range: 0 - 60 bar, Power: 400 W, Voltage: 220V / 50/60 HZ, Flow: 360 LPH, Speed: 1440 r/min, Weight: 15 KG.

Triple Piston Motorized Hydro Testing Pump with 2 HP single-phase or 3 HP three-phase motor. Designed for pressure testing closed-loop systems, including water meters, plumbing lines, pressure vessels, solar systems and fire-fighting sprinkler lines. Key Specs: Testing Pressure Range: 0 - 40 bar, Motor Power: 2 HP, Voltage: 220V / 50/60 HZ, Water Suction: 40 LPM, Piston: Triplex.

750 W, 110 V automatic conduit/mild-steel pipe threading machine with NPT threads, cutting at 25 rpm with a 60 rpm rapid reverse, 18 kg. Approx. price: Rs 49,500 / Unit.

Push-through wedge anchor bolt (6-20 mm thread diameter) for non-cracked concrete and dense natural stone, available zinc-plated for indoor use or in A2 stainless steel for outdoor/damp conditions. Approx. price: Rs 20 / Piece.

1500 W single-phase industrial cable crimping tool built for reliable, repeated crimping work. Approx. price: Rs 85,000 / Piece.

Replaceable cutting head. One hand operation. Special toothed tool head, not easy to break off or flyout after cut. In-built Safety features. For cutting Cu/Al cable upto 32mm Dia. For cutting fine and superfine stranded Cu/Al cables upto 32mm Dia. Features display for Easy Reading on Battery Percentage, Pressing Times, Fault Code, and Maintenance Note. Key Specs: Rated pressure: 20KN, Stroke: 29mm, Cutting Range: Single Core Cu Cable ≤ Ø23mm, Four Core Cu Cable ≤ Ø32mm, Single Core Al Cable ≤ Ø25mm, Single Core armoured cu Cable ≤ Ø32mm, Oil Capacity: 60ml, Voltage Capacity: 18V/2.0Ah, Charging Time: 40mins, Charging Voltage: AC 100V-240V; 50-60HZ, Package: Plastic Box, Weight (with battery): 3.1 Kgs, Size: 438 X 164 X 75mm. Accessories: Battery (2 pcs), Charger (1 pc), Sealing ring of cylinder (1 set), Sealing ring of safety valve (1 set).

The CX-8010, third-generation wire pulling machine, provides an easy solution for both high- and low-voltage cable pulling in concealed walls. Equipped with a powerful brushless motor and gear box that can quickly feed and retract the 30-meter polymer fish tape installed on its drum. Key Specs: Volts: 21V, Threading speed: 0-40m/min, Pull Force: 0-880 N, RPM: 0-2600RPM, Net Weight: 8 Kgs, Fish Tape length: 30m.

2000 W electric wall chaser (model RMC2535), 230 V, 2200 rpm no-load speed, cutting up to 35 mm deep and 35 mm wide; supplied with cutting blade, blade washer, Y-wrench, carbon brushes and case. Approx. price: Rs 25,500 / Piece.

Belt-type pipe sander with 1200 W input / 750 W output, running 2,700-7,000 rpm with a 20/40 x 815 mm belt at 22 m/sec belt speed, only 3.8 kg. Approx. price: Rs 1,28,250 / Piece.