Easy set-up and operation, self-centering with high precision, ratchet handle for easy tool feed/back, lightweight and compact, standard electric drive with optional pneumatic drive. Working range ID 150-330mm, 1800W, 220V 50/60Hz, wall thickness < 20mm, 14 RPM, weight 52kg.

Easy set-up and operation, self-centering with high precision, ratchet handle for easy tool feed/back, heavy-duty compact design, standard electric drive with optional pneumatic drive. Working range ID 300-600mm, 2000W, 220V 50/60Hz, wall thickness < 20mm, 10 RPM, weight 98kg. Supplied with interchangeable bevel-angle cutting inserts and a carry case.

Manually operated hydraulic pipe bender suitable for bending metal pipe and tube. Sliding wing heads with single-circuit hydraulic system and spring return allow controlled, precise bending. Supplied with a set of bending formers. Bending range 21.3-60mm, shoes 1/2", 3/4", 1", 1 1/4", 1 1/2", 2", hydraulic ram output 13 ton, ram stroke 250mm, weight 66.9kg.

Hydraulic pipe bender using hydraulic pressure (like an automotive jack) to bend metal pipe and electrical conduit to specific angles via a hydraulic piston pressing the pipe between bending dies. Bending range 21.3-88.5mm, shoes 1/2" to 3", hydraulic ram output 20 ton, ram stroke 290mm, weight 120.8kg.

Electro-hydraulic operated pipe bending machine, capacity 1/2" to 4". Designed for precision cold bending of thick-walled pipes (gas, water, steam, black iron, galvanized, Schedule 40 & 80) up to 90 degrees, complying with GB/T 3091, DIN 2440, EN 10255 and BS 1387 standards. Bending range 21.3-108mm, shoes 1/2" to 4", hydraulic ram output 20 ton, ram stroke 370mm, weight 163.8kg. Supplied with suitable former in a reinforced wooden case.

Optimal tool for quick pressure or leak testing of smaller piping systems and vessels in sanitary and heating installations. Compact design ideal for tight spaces; simple, light and handy for residential and industrial use. Testing pressure range 0-60 bar, hub suction capacity 45ml/stroke, tank capacity 12L, R1/2" connection, twin valve, weight 8kg.

Hydraulic testing for leaks in heating and oil installations, air conditioning, sprinkler and other systems. Complete with high-pressure hose and connectors; lubricable pump plunger with replaceable seals; efficient running needle valves for continuous operation. Testing pressure range 0-60 bar, hub suction capacity 13ml/stroke, tank capacity 10L, R1/2" connection, single valve, weight 4.5kg.

Electric test pump designed for pressure testing water systems such as water meters, plumbing lines, pressure vessels, solar systems and sprinkler systems, in residential and commercial buildings. Output pressure adjusted via a knob while watching the pressure gauge. Testing pressure range 0-60 bar, 400W, 220V 50/60Hz, flow 360 LPH, 1440 rpm, weight 15kg. Includes standard accessories: hose, cable, filter and storage box.

Triple-piston motorized hydro testing pump powered by a 2HP single-phase or 3HP three-phase motor, used for hydro-testing purposes. Designed for pressure testing closed-loop systems such as water meters, plumbing lines, pressure vessels, solar systems and fire-fighting sprinkler lines. Testing pressure range 0-40 bar, motor power 2HP, 220V 50/60Hz, water suction 40 LPM, triplex piston.

Two-in-one cordless tool with two-stage hydraulic system at 32kN, OLED display showing battery percentage, working times, fault code and maintenance note. Crimping and cutting cycle time 3-6 secs. Rated pressure 32kN, stroke 40mm, max cutting 40mm Cu/Al cable, crimping range Cu 16-400mm² (tubular lug), 18V/4.0Ah, ~80 min charging, weight 3.9kg (without jaws/battery), size 450x81x128mm. Standard accessories: crimping head, cutting head, 2 batteries, charger, sealing rings and crimping dies (16-400mm²).

Replaceable cutting head with one-hand operation, special toothed tool head resistant to breaking/flying off after cut, built-in safety features. For cutting fine and superfine stranded Cu/Al cable up to 32mm dia. Rated pressure 20kN, stroke 29mm, cutting range up to Ø32mm depending on cable type, oil capacity 60ml, 18V/2.0Ah, 40 min charging, weight 3.1kg (with battery), size 438x164x75mm. Standard accessories: 2 batteries, charger and sealing ring sets.

Third-generation wire pulling machine offering an easy solution for high- and low-voltage cable pulling in concealed walls. Powerful brushless motor and gearbox quickly feed and retract the 30m polymer fish tape on its drum. 21V, charging 100-240V 50-60Hz 2.3A, Makita 4Ah DC battery, threading speed 0-40m/min, pull force 0-880N, 0-2600 RPM, net weight 8kg, fish tape 30m x 5.8mm.